Delvitech Expects Its Bengaluru Plant to Create 500 to 800 Engineering and Manufacturing Jobs in Five Years

A Swiss company that builds AI inspection machines for circuit boards expects its new Bengaluru factory to create 500 to 800 jobs in the next five years, and the roles it describes are skilled ones. Delvitech plans to machine parts, measure them and build complete machines in Bengaluru, with the facility due to become operational in the first quarter of 2027. At Metaintro we read a factory announcement by asking which trades it will actually hire, and the activities this one names, machining, measurement and integration, point toward machinists, metrology specialists, electronics technicians and integration engineers. Here is what the plant will do, what the jobs are likely to demand, and which Indian qualifications line up with them.

What Is Delvitech Building in Bengaluru?

The company is setting up a manufacturing and technology facility on a 65,000-square-foot site in the city. The money arrives in stages. There is an initial $10 million phase, and the total planned investment runs from $25 million to $30 million.

Delvitech makes automated optical inspection systems, known as AOI, along with solder paste inspection systems, known as SPI. Both check printed circuit boards during SMT production, looking at details from component location and polarity to solder joints. The company release ties the move to Indian OEMs and EMS companies that are scaling production and adopting more automation and traceability, and presents the plant as a way to bring its inspection machines closer to them.

The site is meant to do more than one job. It will serve as a support centre with a dedicated demonstration area where customers can trial and evaluate machines locally, and it will carry engineering and R&D work for localisation and continuous improvement.

Is the 800 Figure a Firm Hiring Target?

No, and it helps to read the number carefully. The company says the facility is expected to create 500 to 800 jobs over five years. That is a range and a forecast, not a count of open vacancies.

The jobs are also described by type. The expected roles are technical, engineering, and manufacturing jobs, and the plan is to build specialised manufacturing, engineering and technical skills along the way. The announcement does not split the range by role, by pay band or by year, so it gives no basis for expecting a single mass recruitment drive.

Why Is This a Bigger Step Than It First Looks?

Delvitech's own website still describes a company that makes everything at home. Its about page states that all research, prototyping, production, and assembly activities are carried out in Switzerland, and it lists two Swiss research partners, the Dalle Molle Institute for Artificial Intelligence and the Department of Innovative Technologies.

The Bengaluru plant changes that picture. The company already has an Indian entity, DelvitechAI Vision Systems India Pvt. Ltd., listed at an address on Ulsoor Road in Bangalore, alongside offices in Switzerland, the United States, Germany and Italy. Moving machining, measurement and machine building into India would put Indian workers on work that the site says is currently done in Switzerland.

"We are investing in India for the long term, building a facility that goes beyond assembly to deliver real manufacturing, technology and customer value locally," in the words of Vasanth Kumar, Head of Asia Operations, in the Delvitech announcement.

What Kind of Work Will Happen Inside the Plant?

The company lists three core activities, in-house precision machining, metrology and equipment integration, all under one roof. The stated purpose is to control quality and tolerances at every stage, shorten lead times and localise engineering support.

Each of those activities maps onto a distinct set of workers.

• Precision machining means making precision parts in-house, the kind of CNC setting and operation the ITI Machinist trade teaches.
• Metrology means proving those parts are accurate. Critical components will be inspected with an in-house Coordinate Measuring Machine and other metrology equipment, for accuracy, repeatability and compliance.
• Equipment integration means bringing together mechanical, electrical, optical, software and control systems into a working inspection machine.

The trade press adds a detail that matters for software people. The integrated facility will house optical and electrical assembly, and software development alongside the machining and CMM work, which widens the pool beyond the shop floor.

What Do Delvitech's Machines Actually Do?

Knowing the product helps you talk about it in an interview. Its Horus platform is presented as performing both AOI and SPI with true 3D precision, and the company claims it cuts false positives by a factor of ten. Its XP element inspects at 0.4 sec per field of view, and the system handles boards up to 560 × 550 mm.

The second platform, Aton, targets tall and heavy parts. Its patented optical head uses 6 cameras, and its Z axis focus adjusts across an 80 mm range for components up to 140 mm high. The company says the in-house machining and measurement are meant to control quality and tolerances at every stage.

Quality standards run through the product too. Horus combines integrated OCR with full 360° inspection to check compliance with IPC standards. If you already work to IPC standards on an SMT line and can explain why a joint fails inspection, put that on your CV, since it is the language these machines are sold in.

Operators do not need to be programmers. The company's own FAQ says its platforms run through intuitive interfaces without complicated lines of code, so knowing how an electronics line runs is useful even without a coding background.

Which Indian Trade Qualifications Match the Machining Jobs?

The closest government route is the Machinist trade under the Craftsmen Training Scheme, run through ITIs by the Directorate General of Training. The course lasts two years, and entry requires a pass in the 10th class examination with Science and Mathematics or an equivalent.

The curriculum is close to what a precision machine builder needs. First year trainees work up to grinding to an accuracy of ±0.01mm, and the second year adds CNC turning and CNC milling, covering setting, operation and part programming. Every year includes 150 hours of mandatory OJT at a nearby industry, or a group project where none is available, and passing trainees receive the National Trade Certificate.

The first year sets a tolerance for each kind of work. Slotting work is trained to ±0.04 mm, and conventional milling operations to ±0.02 mm, before trainees move on to surface and cylindrical grinding.

The official job role also covers inspection. A machinist is expected to check completed parts with measuring instruments and gauges to ensure the prescribed accuracy, which is the bridge into metrology work. The same document sets out a progression from Technician to Senior Technician to Supervisor and up to Manager, so an entry role at a plant like this can be the first rung. For more on how certificates change a search, read our guide to mechanical engineering certification courses.

Which Qualifications Fit the Electronics and Integration Roles?

For the electrical side of integration, the matching ITI course is the Electronics Mechanic trade, also a two year ITI course. Trainees practise SMD soldering and de-soldering, learn to identify defects and rework PCBs, and work with sensors and microcontroller systems. That is the hands on knowledge of the boards a Delvitech machine is built to inspect.

The course runs 2400 hours plus 300 hours of OJT or group project, in units of 24 trainees, and entry needs the same 10th class pass with Science and Mathematics. In the first year trainees measure circuit parameters on a digital storage oscilloscope, build regulated power supplies and move from through hole soldering to SMD soldering of discrete components. The second year adds rework on various IC packages, an 8051 microcontroller system and circuits built around industrial sensors.

Engineers and supervisors can look at the national standards written for electronics factories. The Electronics Sector Skills Council of India sets out an EMS Operation and Maintenance Manager role at NSQF Level 6. One of its performance criteria is to observe the feedback for any defects through the Automated Optical Inspector and take corrective actions, the kind of AOI work Delvitech builds machines for.

The entry bar for that role is spelled out. It asks for a B.E./B.Tech in Electrical or Electronics Engineering with 02 Year of relevant experience, or a diploma after 12th with 4 years, or an NSQF Level 4 EMS Technician certificate with 4 years. The same standard asks the manager to supervise the program and debug it for false call, and to guide the solder paste inspector in updating the part library for solder shorts, missing parts and shifted parts. Reduced false calls are one of the selling points Delvitech lists for its machines. This qualification pack is version 2.0, approved in 2022, and it lists a deactivation date in 2025, so check the council's current list before paying for a course built on it. Engineers who already run SMT lines will recognise that vocabulary from their own work.

Electronics production in India rose to an estimated ₹13.11 lakh crore in 2025-26, and Delvitech is building its new plant close to the customers behind it.

Why Bengaluru, and What Does the Wider Market Look Like?

The reason given is proximity. Founder and CEO Roberto Gatti describes customers who wanted the company close rather than merely present, and sums up the choice of city as "Bangalore is that answer" in the company release.

The official data explains the pull. India's electronics production grew from ₹1.90 lakh crore in 2014-15 to an estimated ₹13.11 lakh crore in 2025-26, and the sector has created nearly 25 lakh jobs over the decade, according to the July 2026 release from the electronics ministry. The same release puts domestic value addition at 23%, up from 15%, and says more than 40 major component manufacturers have established or expanded in the country.

Bengaluru is also where the industry gathers. Delvitech showed its Horus, Aton and Horus Dual Lane machines at productronica India 2026, held at the Bangalore International Exhibition Centre alongside electronica India, and the two shows together drew more than 750 exhibitors from over 30 countries and support from the Government of Karnataka. The programme even included a Hand Soldering Test and an industrial visit to the Central Manufacturing Technology Institute, which the trade report linked to technical skills.

When Could Hiring Start?

The plant is scheduled to be operational in Q1 CY 2027. The announcement gives no hiring timetable, so it does not say which roles open first or how hiring is spread across the five year window. It also does not name a recruitment channel for the Indian plant, so watching the company's Indian entity and its presence at trade events is the practical way to track it.

For job seekers weighing a move, the scale is modest next to the giant phone assembly campuses. Mobile manufacturing units in Hosur, Sriperumbudur and Bangalore alone employ more than one lakh people. The Delvitech roles are fewer, and the company describes them as specialised manufacturing, engineering and technical work. For a look at how Indian factory workers are already being paid for their trade knowledge in new ways, see how robotics firms are paying Indian factory workers.

What This Means for Job Seekers, and What Should You Do Next?

This announcement matters more for the kind of work than for the headcount. Phone making is the driving force of India's electronics growth, and the mobile ecosystem alone supports around 12 lakh jobs, direct and indirect. A plant that machines, measures and builds inspection equipment itself offers far fewer roles, built around the precision trades described above. Our take is that the smart move is to prepare for the skill, not to wait for the vacancy.

Here is how to do that.

• Machinists should get CNC turning and milling on record now. The ITI Machinist trade covers CNC turning and CNC milling in its second year, and experience measuring your own parts to tight tolerances is the natural route into CMM work.
• Electronics technicians should lean on SMT line experience. Knowing how boards fail, and how AOI flags defects, is directly relevant to a company that builds and supports inspection machines.
• Engineers with electrical, electronics or mechatronics degrees should build a portfolio that crosses mechanical, optical and software systems, since integrating all of those disciplines is one of the plant's three core activities.

Treat the 500 to 800 range as a signal of direction rather than a promise. CNC, metrology and SMT skills are not tied to one employer, so the preparation can pay off whether or not your first job is at this plant.

Related Articles

• Machinist Certification and What It Actually Changes About Your Job Search
• How to Get Machinist Certification and Advance Your Manufacturing Career
• Skills for Your Manufacturing Resume
• Mechanical Engineering Certification Courses That Actually Move Your Career Forward
• Electrical Engineer Salary and How to Earn More
• How Seoul Job Seekers Are Training to Land Samsung and SK Hynix Chip Jobs
• Unlocking India's Potential in Labor-Intensive Manufacturing
• Keensemi Tackles Semiconductor Talent Shortage
• Skills-Based Hiring Takes Center Stage in India

People Also Asked

Q: How many jobs will Delvitech's Bengaluru plant create?

A: The company expects the facility to create 500 to 800 jobs over the next five years across technical, engineering and manufacturing roles, a forecast range rather than a fixed hiring target.

Q: When will the Delvitech facility open?

A: The facility is planned to become operational in Q1 CY 2027, with an initial investment of USD 10 million and an overall investment of USD 25 to 30 million.

Q: What qualification do I need to become a machinist in India?

A: The ITI Machinist trade takes two years and requires a pass in the 10th class examination with Science and Mathematics, and trainees who pass receive the National Trade Certificate.

Ready to explore? Metaintro brings together 50M jobs in one place. Create a profile and start your search.